Barr Truck Group Saves $25,000 In Just One Winter With Clean Burn Waste Oil Furnaces
LANCASTER, PA -- Barr Truck Group saved $25,000 on heating bills this past winter by converting the used motor oil collected at their two Maryland service facilities into free heat. More than 39,000 square feet of shop space spread between the Salisbury and Delmar locations is heated with Clean Burn waste oil furnaces.
“We operate 37 service bays across our two locations and generate thousands of gallons of waste oil,” says Dave Barrett, Machine Shop Manager, “To have a system that recycles that oil while saving us money is a huge advantage to our business.”
As part of the dealer network for the Navistar, Freightliner, Carrier Transicold, and Isuzu brands, Barr Truck has access to tap a nationwide recommendation pool. When research on a new heating system began, the case for Clean Burn was clear. “Once we decided to use our waste oil for heat, we really started to do our homework on the best system,” explains Barrett, “Clean Burn was recommended across the board by the other truck dealers we talked to.”
The conversion from fuel oil heat was made at their Salisbury location in 2008 with the installation of three CB-5000 units. The Delmar location converted from propane heat with a CB-5000 installed in 2008 and a CB-3500 installed in 2009.
The furnaces were installed and are now serviced by Eco Heating Systems, the Authorized Distributor for Clean Burn products in Maryland and Southern Delaware. “They’re a great group to work with,” Barrett says of the relationship with Eco Heating Systems, “The service and support we get from having a local distributor like that is really what sets Clean Burn apart.”
Barr Truck Group recycled more than 8,000 gallons of waste oil in their Clean Burn furnaces last winter alone.
“We know we can count on our Clean Burns,” says Barrett, “The reliability and available support from our distributor allows us to focus on running our business and not worrying about our furnaces.”
For more information on Barr Truck Group visit www.barrtruck.com. For additional details on waste oil heating products available in Maryland and Southern Delaware, visit http://www.ecowasteoilheaters.com/.
There are over 80,000 Clean Burn functional furnaces and boilers located throughout the world that burn millions of gallons of waste oil each year on-site, at the point of generation. This volume of waste oil would otherwise be transported on highway systems and pose a considerable risk to spills and/or contamination to the environment.
Clean Burn is an ENERGY STAR® partner. The company holds numerous industry certifications and works with the U.S. government, the Environmental Protection Agency and various associations to help coordinate the establishment of standards and regulations related to heat recovery and recycling efforts involving used motor oils.
Wednesday, March 30, 2011
Wednesday, March 23, 2011
Tuesday, March 8, 2011
Clean Burn waste oil furnace maintenance: About Block Flushing your oil burner
What is block flushing? Clean Burn has designed a Block Flusher that will clean the carbon build-up from the pre-heater block inside the waste oil burner.
Why should I have my Clean Burn furnace block flushed? Regular furnace maintenance and block flushing is very important to keep the nozzle and burner components clean so that the burner can fire efficiently and prolong your furnace life span.
How often should I have the block flush performed? Once a year, or every 1000 hours.
How can I schedule a block flush? Eco Heating Systems will inspect your furnace at your regularly scheduled periodic maintenance appointment to determine if block flushing is required. If you service your own waste oil heater, you may call us at 866-888-1103 to schedule a block flush.
Visit our website for more information: http://www.ecowasteoilheaters.com/
Why should I have my Clean Burn furnace block flushed? Regular furnace maintenance and block flushing is very important to keep the nozzle and burner components clean so that the burner can fire efficiently and prolong your furnace life span.
How often should I have the block flush performed? Once a year, or every 1000 hours.
How can I schedule a block flush? Eco Heating Systems will inspect your furnace at your regularly scheduled periodic maintenance appointment to determine if block flushing is required. If you service your own waste oil heater, you may call us at 866-888-1103 to schedule a block flush.
Visit our website for more information: http://www.ecowasteoilheaters.com/
Wednesday, March 2, 2011
Gas could reach $5 if Libyan unrest continues (Source: USA Today)
Please check out this article from USA Today. Gasoline prices are quickly approaching the record average set in July 2008 of $4.11/gallon.
http://www.usatoday.com/money/industries/energy/2011-02-22-1Alibyagas22_ST_N.htm
http://www.usatoday.com/money/industries/energy/2011-02-22-1Alibyagas22_ST_N.htm
Tuesday, February 15, 2011
Clean Burn Service Tip of the Week: Prevent Frozen Air Lines
Avoid frozen air lines. If you do not have operating compressed air, your Clean Burn furnace will not operate.
Humidity or condensation in your shop can materialize as water inside your air compressor lines. On very cold days, especially if your air lines are outside, or along a non-insulated exterior wall, your airline can freeze.
If you do not have operating compressed air, your Clean Burn furnace will not operate. There are two things you can do to prevent water in your air lines. 1) install air dryers on your air compressor system and make sure the air dryers are operating. 2) install an automatic water eliminator at the air compressor. Eco Heating Systems can provide a quotation to install an automatic water eliminator if you are having problems with water in your compressed air lines.
For More Clean Burn waste oil heater service tips, visit our website at: http://www.ecowasteoilheaters.com/waste-oil-heater-maintenance.html
Humidity or condensation in your shop can materialize as water inside your air compressor lines. On very cold days, especially if your air lines are outside, or along a non-insulated exterior wall, your airline can freeze.
If you do not have operating compressed air, your Clean Burn furnace will not operate. There are two things you can do to prevent water in your air lines. 1) install air dryers on your air compressor system and make sure the air dryers are operating. 2) install an automatic water eliminator at the air compressor. Eco Heating Systems can provide a quotation to install an automatic water eliminator if you are having problems with water in your compressed air lines.
For More Clean Burn waste oil heater service tips, visit our website at: http://www.ecowasteoilheaters.com/waste-oil-heater-maintenance.html
Wednesday, February 9, 2011
AAA Fuel Gauge Report - Gasoline and Diesel Prices up average of 47 cents/gallon
Fuel prices are still rising. The AAA Daily Fuel Gauge Report http://www.fuelgaugereport.com/ reports that gasoline prices are up approximately forty seven cents per gallon over the same time last year.
Location Regular Today Regular Last Year
Baltimore $3.07/gallon $2.64/gallon
Hagerstown $3.10/gallon $2.66/gallon
Salisbury $3.00/gallon $2.55/gallon
Dover $3.02/gallon $2.52/gallon
Wilmington $3.15/gallon $2.63/gallon
Lancaster $3.13/gallon $2.64/gallon
Location Diesel Today Diesel Last Year
Baltimore $3.50/gallon $2.85/gallon
Hagerstown $3.61/gallon $2.92/gallon
Salisbury $3.47/gallon $2.78/gallon
Dover $3.51/gallon $2.82/gallon
Wilmington $3.52/gallon $2.90/gallon
Lancaster $3.65/gallon $2.97/gallon
What can you do to save money on your heating bills? Call Eco Heating Systems and invest in a Clean Burn. Toll Free 866-888-1103
Location Regular Today Regular Last Year
Baltimore $3.07/gallon $2.64/gallon
Hagerstown $3.10/gallon $2.66/gallon
Salisbury $3.00/gallon $2.55/gallon
Dover $3.02/gallon $2.52/gallon
Wilmington $3.15/gallon $2.63/gallon
Lancaster $3.13/gallon $2.64/gallon
Location Diesel Today Diesel Last Year
Baltimore $3.50/gallon $2.85/gallon
Hagerstown $3.61/gallon $2.92/gallon
Salisbury $3.47/gallon $2.78/gallon
Dover $3.51/gallon $2.82/gallon
Wilmington $3.52/gallon $2.90/gallon
Lancaster $3.65/gallon $2.97/gallon
What can you do to save money on your heating bills? Call Eco Heating Systems and invest in a Clean Burn. Toll Free 866-888-1103
Thursday, January 20, 2011
Clean Burn Parts that you should keep on hand
Here is a list of the most common parts we ship out to customers during the cold weather.
1) Ignitor (Clean Burn part #33189) - The electric ignitor on your Clean Burn furnace is what causes the "spark" that creates your flame. If you have tried to reset your furnace and there is no spark or flame, it may be that your ignitor has gone bad. So that you don't get caught in the cold, it is a good idea to have an extra ignitor on hand.
2) Nozzle (9-5 nozzle Clean Burn part # 32000, or 9-11 nozzle (CB-5000 only) Clean Burn part# 32002)- The nozzle on your furnace can become clogged by contaminants or dirt in your oil supply. If you have tried cleaning your nozzle to no avail, or if there is a hard, black or "tarry" blockage in the orifice - your nozzle should be replaced.
3) Electrode -single piece (Clean Burn part#33183)- Over time, oil residue can build up on the electrodes, or the electrode wires can become worn down and the electrode should be replaced.
To order Clean Burn parts, please call Eco Heating Systems toll free at 1-866-888-1103 or download our parts order form:
http://www.ecowasteoilheaters.com/pdf/CleanBurnPartsOrderForm.pdf and fax it to 717-806-0335
1) Ignitor (Clean Burn part #33189) - The electric ignitor on your Clean Burn furnace is what causes the "spark" that creates your flame. If you have tried to reset your furnace and there is no spark or flame, it may be that your ignitor has gone bad. So that you don't get caught in the cold, it is a good idea to have an extra ignitor on hand.
2) Nozzle (9-5 nozzle Clean Burn part # 32000, or 9-11 nozzle (CB-5000 only) Clean Burn part# 32002)- The nozzle on your furnace can become clogged by contaminants or dirt in your oil supply. If you have tried cleaning your nozzle to no avail, or if there is a hard, black or "tarry" blockage in the orifice - your nozzle should be replaced.
3) Electrode -single piece (Clean Burn part#33183)- Over time, oil residue can build up on the electrodes, or the electrode wires can become worn down and the electrode should be replaced.
To order Clean Burn parts, please call Eco Heating Systems toll free at 1-866-888-1103 or download our parts order form:
http://www.ecowasteoilheaters.com/pdf/CleanBurnPartsOrderForm.pdf and fax it to 717-806-0335
Subscribe to:
Posts (Atom)