Clean Burn CB-5000 on 500 gallon tank and stand

Check out some pictures of a CB-5000 waste oil furnace we recently installed in Waldorf, MD:

Clean Burn waste oil furnace maintenance: About Block Flushing your oil burner

What is block flushing?  Clean Burn has designed a Block Flusher that will clean the carbon build-up from the pre-heater block inside the waste oil burner. 

Why should I have my Clean Burn furnace block flushed?  Regular furnace maintenance and block flushing is very important to keep the nozzle and burner components clean so that the burner can fire efficiently and prolong your furnace life span. 

How often should I have the block flush performed?  Once a year, or every 1000 hours. 

How can I schedule a block flush?  Eco Heating Systems will inspect your furnace at your regularly scheduled periodic maintenance appointment to determine if block flushing is required.  If you service your own waste oil heater, you may call us at 866-888-1103 to schedule a block flush. 

Visit our website for more information:  http://www.ecowasteoilheaters.com/

Gas could reach $5 if Libyan unrest continues (Source: USA Today)

Please check out this article from USA Today.  Gasoline prices are quickly approaching the record average set in July 2008 of $4.11/gallon.

http://www.usatoday.com/money/industries/energy/2011-02-22-1Alibyagas22_ST_N.htm

Clean Burn Service Tip of the Week: Prevent Frozen Air Lines

Avoid frozen air lines. If you do not have operating compressed air, your Clean Burn furnace will not operate.

Humidity or condensation in your shop can materialize as water inside your air compressor lines. On very cold days, especially if your air lines are outside, or along a non-insulated exterior wall, your airline can freeze.

If you do not have operating compressed air, your Clean Burn furnace will not operate. There are two things you can do to prevent water in your air lines. 1) install air dryers on your air compressor system and make sure the air dryers are operating. 2) install an automatic water eliminator at the air compressor. Eco Heating Systems can provide a quotation to install an automatic water eliminator if you are having problems with water in your compressed air lines.

For More Clean Burn waste oil heater service tips, visit our website at:  http://www.ecowasteoilheaters.com/waste-oil-heater-maintenance.html

AAA Fuel Gauge Report - Gasoline and Diesel Prices up average of 47 cents/gallon

Fuel prices are still rising. The AAA Daily Fuel Gauge Report http://www.fuelgaugereport.com/ reports that gasoline prices are up approximately forty seven cents per gallon over the same time last year.




Location              Regular Today                Regular Last Year

Baltimore                $3.07/gallon                    $2.64/gallon

Hagerstown               $3.10/gallon                     $2.66/gallon

Salisbury                       $3.00/gallon                    $2.55/gallon

Dover                        $3.02/gallon                    $2.52/gallon

Wilmington                      $3.15/gallon                   $2.63/gallon

Lancaster                        $3.13/gallon                      $2.64/gallon



Location                      Diesel Today                    Diesel Last Year

Baltimore                        $3.50/gallon                          $2.85/gallon

Hagerstown                         $3.61/gallon                          $2.92/gallon

Salisbury                            $3.47/gallon                          $2.78/gallon

Dover                                 $3.51/gallon                        $2.82/gallon

Wilmington                           $3.52/gallon                     $2.90/gallon

Lancaster                               $3.65/gallon                       $2.97/gallon

What can you do to save money on your heating bills? Call Eco Heating Systems and invest in a Clean Burn. Toll Free 866-888-1103

Clean Burn Parts that you should keep on hand

Here is a list of the most common parts we ship out to customers during the cold weather.


1) Ignitor (Clean Burn part #33189) - The electric ignitor on your Clean Burn furnace is what causes the "spark" that creates your flame.  If you have tried to reset your furnace and there is no spark or flame, it may be that your ignitor has gone bad.  So that you don't get caught in the cold, it is a good idea to have an extra ignitor on hand.
 
2) Nozzle (9-5 nozzle Clean Burn part # 32000, or 9-11 nozzle (CB-5000 only) Clean Burn part# 32002)- The nozzle on your furnace can become clogged by contaminants or dirt in your oil supply.  If you have tried cleaning your nozzle to no avail, or if there is a hard, black or "tarry" blockage in the orifice - your nozzle should be replaced. 
 
3) Electrode -single piece (Clean Burn part#33183)- Over time, oil residue can build up on the electrodes, or the electrode wires can become worn down and the electrode should be replaced. 

To order Clean Burn parts, please call Eco Heating Systems toll free at 1-866-888-1103 or download our parts order form:
http://www.ecowasteoilheaters.com/pdf/CleanBurnPartsOrderForm.pdf and fax it to 717-806-0335

Fuel Prices projected up to $4.00/gallon in 2011

Check out the AAA Fuel Gauge report for the average fuel prices in your area.

http://fuelgaugereport.aaa.com/?redirectto=http://fuelgaugereport.opisnet.com/index.asp

Fuel prices are expected to rise to as much as $4.00 to $5.00 per gallon in 2011.  What will you do to help keep your costs down?  Will you drive less?  Will you invest in a more economical car?  Will you start walking more?  We'd like to hear from you!