Clean Burn celebrates 35th Anniversary

CONGRATULATIONS!!! Clean Burn is celebrating 35^th years in the waste oil furnace business!  No other waste oil furnace company even comes close.  What started in Lancaster County, PA as a revolutionary idea – that waste oil could be recycled for heat— turned into a thriving business.  Today, Clean Burn leads the world in the manufacturing of waste oil furnaces. 

Clean Burn wrote the book on reliability, efficiency and durability.   Its heavy duty construction is designed for industrial use and it is the only waste oil furnace on the market designed from the ground up to burn waste oil.  That is why our customers tell us “Better get a Clean Burn!”   

Cold Weather Is On Its Way

COLD weather is on its way.  Please find below a couple of tips that can help keep your Clean Burn running properly during this cold snap.

• Monitor the oil supply in your tank.  Make sure you have sufficient good oil.  With this extremely cold weather, you will use oil at a much faster rate.  Make sure there is plenty of oil in the tank to last over night.  Make sure your oil is not contaminated with antifreeze, water or sludge.  Please see the list below for approved oils.

          Crank case oil

          Transmission Fluid

          New Fuel Oil # 2, #4, and #5

          Synthetic Used oil

          Hydraulic Fluid (up to 90 Weight)

          Diesel Oil and Diesel Fuel (New or Used)

• Make sure your air compressor is in a warm environment .   Make sure there is no water in your air compressor or the air compressor line.  Water in the air compressor could freeze and cause your air compressor not to work.  Your furnace will not operate without air coming from your air compressor.

Before You Start Up Your Furnace

Required Steps Before You Start Up Furnace

• ·        Make sure air compressor is on
• ·        Make sure electric has been on at least 15 minutes
• ·        Inspect oil for contaminents
• ·        Measure oil in tank, must contain more than 21”
• ·        Swing open burner, inspect CAD cell, electrodes and nozzle; clean if necessary
• ·        Turn thermostat up to call for heat

After above is complete, you can start up your furnace

Cold Turkey?

I just read an article about this being the coldest Thanksgiving forecasted in nearly 60 years.  The article said this cold snap would cover most of the eastern United States.
Cold seasons like the one coming provide proof that a Clean Burn waste oil furnace is worth its weight in gold and a great reason so many people say ...You Better Get a Clean Burn.

How To Be Happy With Your Waste Oil Furnace, Part 4

An annual maintenance is an important part of caring for your waste oil furnace.   At ECO HEATING SYSTEMS we highly recommend that our customers have a yearly periodic maintenance on their furnaces.  This includes a block flush.  Clean Burn has designed block flushing equipment that will clean the carbon build-up from the pre-heater block in the burner.  Over time heat causes the oil to build up in your burner. It is very important that this block flush is done to keep the nozzle and the burner components clean so that the burner can fire efficiently and last longer.

How To Be Happy With Your Clean Burn Waste Oil Furnace, Part 3

Make sure to put authorized fuels in your tank.  Just like an automobile needs the proper fuel in its tank, so does a waste oil furnace.  Customers who have an effective fuel management plan can have great success with their waste oil furnaces.

Clean Burn waste oil heaters are designed from the ground up to burn waste oil.  That's right~dirty, used waste oil.  The following can happily burn to keep you warm:

• Transmission Fluid
• New Fuel Oils #2, #4 and #5
• Synthetic Used Oil
• Hydraulic Fluid (up to 90 weight)
• Diesel Oil and Diesel Fuel (new or used)

How To Be Happy with your Waste Oil Furnace, part 2

The second tip that will help to make your waste oil furnace experience a happy one is:
Have an authorized Clean Burn representative install your furnace.  How well your furnace is installed will have an impact on how well your furnace operates.  ECO HEATING SYSTEMS is the authorized distributor of Clean Burn products in Maryland and Delaware.  Our company has over twenty five years of experience with Clean Burn furnaces and boilers.
Experience Does Matter!