How to Be Happy with Your Waste Oil
Furnace
Welcome to
our blog about the wonderful world of waste oil furnaces! It is our goal to educate our readers about
how to find satisfaction with their waste oil furnaces. To that end here are four tips that will help to make your waste oil furnace experience
a happy one.
1. Start
out on the right foot by purchasing a waste oil furnace that truly was designed to burn waste oil. Don’t make the mistake of buying a
converted fuel oil furnace. The Clean Burn waste oil
furnace is NOT a converted fuel oil furnace.
In fact, Clean Burn furnaces are the only waste oil
furnaces on the market truly designed to burn waste oil. This allows you to maximize the efficiency of
every gallon of oil. You get more BTU’s out of a Clean
Burn furnace!
2. Have
an authorized Clean Burn representative install your furnace. How well your furnace is installed will have
an impact on how well your furnace operates. Be sure to have a company with Clean Burn experience install your
furnace. ECO
HEATING SYSTEMS is the authorized distributor of
Clean Burn products for Maryland and Delaware. Our company has over twenty years of experience with
Clean Burn furnaces and boilers.
Experience Does Matter.
3. Make
sure to put authorized fuels in your tank. Just like an automobile needs the proper fuel
in its tank, so does a waste oil furnace.
Customers who have an effective fuel management plan can have great
success with their waste oil furnaces.
4. An
annual maintenance is an important part of caring for your waste oil furnace. At ECO HEATING
SYSTEMS we highly
recommend that our customers have a yearly periodic maintenance on their
furnaces. This includes a block flush. Clean Burn has designed block flushing
equipment that will clean the carbon build-up from the pre-heater block in the
burner. Over time heat causes the oil to build up in
your burner. It is very important that this block
flush is done to keep the nozzle and the burner components clean so that the
burner can fire efficiently and last longer.
Posts
